Troubleshooting

• building question

  178 views 4 comments 0 points Most recent by julian February 2014
• Firmware Update and Questions about MIDI sync

  268 views 7 comments 0 points Most recent by squire February 2014
• 23 display and running light problem (solved)

  300 views 9 comments 0 points Most recent by julian February 2014
• Loose atmega causing huge problems

  280 views 7 comments 0 points Most recent by fcd72 February 2014
• My LXR audio outputs are kind of noisy... [solved]

  621 views 18 comments 0 points Most recent by nightworxx January 2014
• No LED blinking after soldering, but only strange sings on LCD - [SOLVED]

  849 views 34 comments 0 points Most recent by julian January 2014
• need help: crashing display, total odd letters, can´t save kits (SOLVED )

  869 views 32 comments 0 points Most recent by siebenachtel January 2014
• Display corruption after a few minutes

  209 views 3 comments 0 points Most recent by Newcastle January 2014
• Problems with store and load off patterns after switching the LXR off / on

  488 views 11 comments 0 points Most recent by Dayflight January 2014
• firmware re-flashing required every few days to keep LXR alive

  1.2K views 22 comments 0 points Most recent by xoxer December 2013
• Low output ?

  266 views 4 comments 0 points Most recent by Lamouette December 2013
• Better button caps?

  757 views 14 comments 0 points Most recent by djversus01 December 2013
• first step lost when pattern change

  84 views 2 comments 0 points Most recent by julian December 2013
• Weirdly acting LXR....

  357 views 9 comments 0 points Most recent by matsu December 2013
• How important is it to clean off all the flux?

  320 views 6 comments 0 points Most recent by ceasless November 2013
• Problem with potmeter noise/pot scanning (SOLVED)

  248 views 7 comments 0 points Most recent by fcd72 November 2013
• Chaselight stopped running after crash (SOLVED) :-)

  320 views 12 comments 0 points Most recent by Speelycaptor November 2013
• LED 1 Voltage

  242 views 9 comments 0 points Most recent by nightworxx November 2013
• Sequencer not running, voice edit mode only

  112 views 3 comments 0 points Most recent by chelma October 2013
• Faulty encoder, or software issue - can someone else try this?

  143 views 4 comments 0 points Most recent by fcd72 October 2013
• Nearly done, 1 problem left

  387 views 12 comments 0 points Most recent by dubtoms October 2013
• LFO crashes the LXR

  392 views 11 comments 0 points Most recent by rudeog October 2013
• The machine craches after one two minutes [solved]

  429 views 11 comments 0 points Most recent by julian October 2013
• Soldering iron eroding fast!

  548 views 12 comments 0 points Most recent by julian October 2013
• LED's next to voice buttons

  123 views 2 comments 0 points Most recent by Varthdader October 2013
• Inserted chips-fired up- aaaaaannd only step 9 lit ??? (solved)

  330 views 15 comments 0 points Most recent by dubtoms October 2013
• step 14 also triggers step 15 & vice versa [SOLVED]

  151 views 4 comments 0 points Most recent by TSR October 2013
• Only on Voice 1, Step1 there is distortion?

  233 views 7 comments 0 points Most recent by bendyjohn September 2013
• Save/Load Trouble

  252 views 6 comments 0 points Most recent by Envelope September 2013
• Probably a faulty Encoder: Part number?

  208 views 4 comments 0 points Most recent by sonicwarrior September 2013