julian
About
- Username
- julian
- Joined
- Visits
- 961
- Last Active
- Roles
- Administrator
Comments
-
@Altitude those are highly switches part no. PB6149L-13-102 Is it completely balls-hat crazy to fit those on the LXR board, i can see the the dimensions is 5,00 mm. vs. 5,08 in the pin spacing. And long the long legs on the higly switches could p…
-
@Altitude those are highly switches part no. PB6149L-13-102
-
Price will be 95,-€ for a complete kit incl. 19% VAT (79.83 without). Sourcecode and Schematic will be made available once I cleaned it up a little bit.
-
Normally this should not happen. That's exactly how I test each mainboard before shipping it out. I use a single audio cable and hot plug it into every audio out once and never had a crash. Where is your jack conected to on the other side?
-
I'm sorry but I have no news about adrians cases. I should get a batch of Girts cases soon.
-
Ok... here it is No release date yet but very soon it will be available in the shop... ;;)
-
No reason I can think of why it should not work. In the end the frontpanel of the LXR works just like a midi controller for the mainboard. The prototcol used is a little bit different but is using UART as well. (since not all functions are accessibl…
-
The next cases are already ordered. Xmas holiday delayed everything a bit but I expect to get them very soon.
-
regarding the firmware version I just incremented it with each 'release' so far. never came around to make meaningfull version umbers or a roadmap. there are still a few things I'd like to implement soon and a few bugs I know of. development stall…
-
I spend new years day programming lots of chips and hope to reveal everything by the end of the week. Still some stuff to do on the manual and I'm waiting for feedback from the final tester
-
sounds like you found the problem. a single LED will pull about 20mA when it is lit. so with about 10 LEDs you will already reach the limit of the power supply you are currently using.
-
really expensive! these are half the price and in europe, too. http://www.tme.eu/de/details/rec001602aypp5n0/alphanumerische-oled-displays/raystar-optronics/#
-
another very nice one
-
I'll try to find another brand of power sockets for the next run.
-
what power supply are you using? So far I have never heard of a LED related hum. LEDs are not even multiplexed oder PWM'ed So I would guess it's a power related problem.
-
I'll look into it. what do you mean by loading pattern 2? you load another pattern set from SD card? so just to recap: - pattern chain works ok - when you load another pattern set from sd card chain is altered when seq is playing - when seq is stop…
-
this does not look like a display connection error. More like a broken display. I'd say the display has to be replaced.
-
A few people did not respond to my E-Mail from a week ago, so I put the remaining enclosures from the first run in the shop. There is also some reduced B-Stock available. The next Batch should arrive after xmas.
-
If I remember right (I have to have another look into the code) the roll is just a modulo operation. So making it free running would need a bit more work. If you just give it a free running counter there could be the problem of a synced start. you d…
-
I could fix it for you for the shipping costs since it is partly due to the wrong hole size on this batch But I think I won't have time before christmas for something like that. did you measure if the button contact closes when you press it?
-
I think the main constraint is the available memory. for a good sounding verb you need more than the 192kb of ram that the LXR has
-
if you just want to sync the xoxbox you should connect the LXR midi out to the xoxbox midi in. make sure that on the LXR in the global settings menu the rx midi filter is set to 'all' set the xoxbox to "midi sync" that should be all.
-
woohoo! \m/
-
another bug confirmed. I can reproduce the double trigger. I'll try to fix it in a few days. shoul dbe something simpel...
-
I will re-check the trigger IO problems. I thought It should work. regarding midi sync: - tempo is set to 0? - also like brendan said: check the midi filter
-
did it show this problem from the beginning on?
-
looks very nice indeed
-
don't set your expectations too high It's just a small fun project for now. The big stuff is coming next year *GG*
-
I will now send out the emails to the remaining people on the my list. Preorders through the forum are now officially closed I should get another big batch around the end of this month and will put it in the shop then.
-
okay. today I got the repainted cases from the last batch back. this time they look great. So the people from this thread should get their email soon and a new and bigger batch is ordered for the shop, but I don't know the lead time yet.