julian
About
- Username
- julian
- Joined
- Visits
- 961
- Last Active
- Roles
- Administrator
Comments
-
yeah, murphys law strikes again #-o I thought it would be impossible, since we test each boards audio IO, SD card and general functionality before shipping them out. And even have the boxes with programmed and unprogrammed boards in different shelv…
-
currently I'm waiting for the samples for the knobs and button caps Software wise the sysex im/export and some tweaks for the additional midi/dinsync IOs is still missing. So My uneducated guess would be 2 months.
-
I'll contact you via email shortly. Sorry for my late reply!
-
1) case files can be found in the wiki: http://wiki.sonic-potions.com/index.php/Enclosure_SVG 2) no I'm afraid not. The PCB is a few mm higher than a normal eurorack frontpanel.
-
which firmware version are you talking about? I could compile it for you, no problem. I'm just still in the landing phase after superbooth and have to catch up with mails and forum posts.
-
full diy kit. the slide is added to the CV + a gate is output on slide notes on the slide out. CV slide can be deactivated to use the slide out as extra trigger track or for external slide modules with variable slide time for example
-
Is this the later version with the little O-rings?
-
I'd love to give them a go, but currently the RE-303 CPU is keeping me super busy. Soundcloud demo sounds great though!
-
All I have is listed in the wiki http://wiki.sonic-potions.com/index.php/Enclosure_SVG I'm, afraid I never got working SVG files for the official enclosure from fcd72
-
The frequency range is selectable by a jumper. You either get suuuper slow cycle times down to 10 minutes, but no real usable audio range, or not so slow cycle times but noise up to audio range. No v/oct tracking. The module is not usable as a class…
-
do you have a SD card in the slot and also at least one preset on it? The error message means the LXR can't read the initial preset file from the SD card.
-
Hmmm I think I have bad news for you. My guess is that the OLED is broken As it is not a graphical display it normally can only show a predefined set of characters and I know of no character thats just a few pixels wide line. To be sure you could…
-
you can just use the continuity (*BEEP* when the probes touch) tester on the multimeter and measure if the pins of the avr are connected to the corresponding pins on the LCD. and if the 5V and GND pins are connected to the marked pins on the avr isp…
-
these are the data lines from the AVR to the OLED additionally you should have GND ond pin 1, 5 and 16 and +5V on pin 2 3,7,8,9,10 are not connected. by one line do you mean the whole upper row of the display is a solid line or is there just a sm…
-
it's the cliff k87MAR series k87mar BLK 6mm USAD white or CL170822FR Afaik these should be the same, but I get mine directly from cliff. So be weary, as they come in all types of shafts and sizes and I have neither ordered from conrad nor rapid yet…
-
I will fix the next bug and make a LXR patch day when the current projects are finally done. Sorry for the long wait. roadmap looks a bit like this: - mal-2 kits -> probably next week - RE-303 CPU -> first boards next week - Malaclypse eurora…
-
ah ok, that's an option. no jumpers are not necessary anymore. The first boards had an ADC option with the idea to re-use the board for other projects, but in the end it seems more economic to me to make dedicated boards.
-
this is the one i used before http://www.mouser.de/ProductDetail/STMicroelectronics/STM32F407G-DISC1/?qs=/ha2pyFadui1YcVs9LwlR5Wqc4ZUxCtym584avAZKUykGi5nsHymTw== This board only has a stereo out. On the LXR board I use 2 external DACs to provide th…
-
The LXR was first developed on an stm32f407 discovery board (~10-15€) But the TOS is quite restrictive and I would not have been allowed to redistribute the boards. Then I decided to move to my own design and added multiple audio outs and the SD car…
-
My wife (simone) should have already send you an email. Parts will be send to you asap.
-
erica enclosures are available in the shop again
-
i just received 3 big boxes with erica cases. currently sorting the smallparts and checking quality. should pop up in the shop over the next days =D
-
M-Audio Fast track pro
-
turing panels are gone
-
m-audio audiophile 24/96 PCI card make an offer
-
original shruthi-xt programmer PCB from fcd. don't need it anymore since I have a new XT. would let it go for shipping fees.
-
raspberyy pi 2 B+ in plasitc case - Make me an offer
-
okay added the missing one and your description
-
There is no ready to manufacture cad drawing of metal enclosures that I have. They are all made by 3rd parties. The position files for the holes etc are available in the wiki as DXF and hgpl. So making a custom frontpanel out of metal should be fea…
-
They are currently at the factory being made so they will pop up in the shop as soon as I have them back in stock. They will be sold via the sonic potions shop, not over at erica.