julian
About
- Username
- julian
- Joined
- Visits
- 961
- Last Active
- Roles
- Administrator
Comments
-
For those of you still waiting. I had to return a few cases to be repainted cause the powder coating was faulty. I have no confirmed shipping date yet for receiving them back, but there is another batch coming in short time.
-
on a closer look the envelope check seems to be commented out atm. I have to check my changelog if this was done for a reason or happened by accident :-.
-
the way it should work at the moment (after looking into the code again) - when offset mode is selected the waveform is reset with every trigger - the other waveforms will only reset the osc if the volume EG value is below 0.01 (which should be sil…
-
sadly too far away for me
-
exactly. that's what 'morph save' is intended for.
-
regarding blank/uncoated cases (bare metal) I just have to tell girts. If you are sure to take them I will get a blank case for you.
-
i would check that both buttons have 5V and also check the soldering at the buttons and the corresponding ICs. both can be done without removing the PCB from the enclosure.
-
they still feel clicky? not much that could be wrong. - step button (from voice, perf, step, load/save group) is attached to U10 pin13 and +5V - mod (from osc, mic, filter, aeg ... group) is attached to U6 pin 4 and +5V here are 2 pics to show th…
-
I have to check if/how many cases are left. I had to return a few of them to fix the powder coating and I don't know when I will get them back. But there should still be a few available when they are fixed. And I'm sure there will be another run soo…
-
about 5,3 x 14,4 x 31,0 cm
-
sound to me like a cold solder joint. the chaselight is either using all 16 leds or none at all. have a look at the schematic page 7: http://www.sonic-potions.de/sites/default/files/documents/FrontpanelSchematic.pdf the LEDs of step 9-16 are all c…
-
have you checked your power connector? maybe it is jhust a loose contact there. Is the LXR still running when you jiggle it a bit? as you said the strange symbols normaly indicate a reboot. I guess the soldering around the display is ok. You ment…
-
Would love to see Adrians case too before taking a decision (know the good qualitiy of Adrians Shruthi metal cases)... maybe adrian has some current pictures without the missing silkscreen? all I have are the prototype pics from a few month ago. Is …
-
since I had a few enclosures with scratches I had to send some back for a new powder coating. I first have to sort out how many I have left (including the upcoming 2nd delivery in a few days) before I will send out more invoices to people on the lis…
-
normally any sd card should work. so far there have been 1 or 2 cards reported that for some reason did not work. how are they formatted?
-
you're welcome to pick it up if you like or do you prefer an invoice and delivery by DHL?
-
in the config.h file they are enabled #define INTERPOLATE_OSC 1 #define INTERPOLATE_FM_OSC 1 regarding the ldm ldr stuff. I never looked into the assembly what gcc is making of the load statement. i just added this note when I stumbled over the ASM…
-
still some left. I think I still have about 7 or 8 cases here and should get 8 more over the next days. then it will take a little longer since they have to be manufactured first. I'llforward the email to you, too.
-
everybody on the list should now have received their e-mail.
-
done
-
the assembly guide is online http://www.sonic-potions.com/MetalEnclosureErica this is also a good way to see all the details of the enclosure. Everybody on the list should receive an email shortly with further details.
-
I will have to see if the CPU allows this. another question would be where to put it in the menu. maybe allowing another LFO mode that turns one of the LFOs into an envelope?
-
is pin 6 of the optocoupler conencted to pin 37 of P1 (the mainboard connector, its marked with midi in) also check the soldering on P1 for bad joints or shorts. the midi jack is directly connected to the mainboard.
-
I should get my new shipping boxes today and will put up an assembly guide so you can also see the details. So I''ll be probably sending out the info to the people on the list tonight or tomorrow.
-
so that would be Girts Seat list (26): Squirts 1 Clemdu 1 Masarin 1 gowron72 1 echo 1 matsu 1 SirCVH 1 cube48 1 tMt 1 gianni 1 drakula 1 BLOKE 1 boe 1 vasculator 1 spneca 1 Spylacopa6 1 bod 1 jbdiver 1 udenjoe 1 KungFuDaz 1 JakeE 1 Level5 1 zthee 1 …
-
have a look at mainboard/LxrStm32/src/DSPAudio/Oscillator.c there is the function calcUserSampleOscFmBlock(...) in the end all you have to do is change the rows //one shot if(itg < info.size) { osc->phase …
-
@Julian possible to get one unpainted / no silkscreen?, guessing no. possibly for the next run. We just have to tell girts before he sends them off to the silkscreening. do you mean blank metal or only with powder coating but no silkscreen?
-
shipping costs will stay the same as for the LXR kit.
-
Girts Seat list (22):Squirts 1Clemdu 1Masarin 1gowron72 1 echo 1 matsu 1 SirCVH 1 cube48 1 tMt 1gianni 1 drakula 1 BLOKE 1 boe 1 vasculator 1 spneca 1 Spylacopa6 1 bod 1 jbdiver 1udenjoe 1 KungFuDaz 1 JakeE 1 Level5 1
-
regarding shipping outside of europe I have to see what the best options are since the enclosures are a little bit too thick to be send as normal registered international letter like the LXR kits.