julian
About
- Username
- julian
- Joined
- Visits
- 961
- Last Active
- Roles
- Administrator
Comments
-
that's beautiful!
-
no I have nothing to do with this
-
yes. metal cases from erica are currently being produced https://www.flickr.com/photos/sonic-potions/sets/72157666344769960 Glad you like the machine! =D
-
what kind of sticker do you have in mind? I have some left from superbooth. The only problem with those is that the sonic potion logo stickers turned out to be transparent 8-} and the other is a cheesy character
-
just made the down payment for the next batch of cases
-
no waiting list, but I should get 100 cases and girts said wait time for another run should be around 3 weeks. So if nothing unforseeable happens (again!) I should have them on stock more regularly.
-
have you checked the polarity of the tantal cap next to the DAC? I had one penrose here for repair where the tantal was inserted the wrong way round and it resulted in an overheating and shutting down 78L05.
-
I have to take closer look at this since @pld made the CCM modifications. But normally I think this should not affect the sample capabilities, since it just defines the memory region for the wavetables in another way. can you just not select them i…
-
there are flat LCDs as well. for example these from kamami are 9.8mm thick. http://kamami.com/lcd-2x16/63128-lcd-ac-1602e-dla-akk-e12-c.html the extra parts that are needed for an LCD (contrast trimmer etc...) already have a space on the normal LXR…
-
finally my rack is out of the bag and on my table again
-
If you like to share I could put them in the wiki, too. I only have the transparent acrylic design files.
-
Is the click still there if you set the filter on the channel to off?
-
until adrian has found another company to produce his gorgeous cases I ordered another small batch of erica synth cases when I met him at the superbooth.
-
I'm finally back from berlin and am totally exhausted. But is was sooo much fun! All modules will be open source. Only Mal-2 will be a THT DIY kit, since the other 3 are using SMD parts.
-
please see the attached pictures for the connections of pin 9 and 12. you just have to solder a wire to the bottom of the PCB. attach 1 end to the leg of the IC socket (on the bottom) and the other end to any point of the same trace. that should be…
-
the caps are made by e-switch and c&k e-switch mouser numbers 612-TAG-RD, 612-TAG-BK etc... there are also chrome coloured caps but I don't know the order number anymore. should be somewhere in the forum.
-
This things with diy kit, like we are all friend... we are not. We are consumer, and sp is a company which sell a product. I my case the product wasn't what it was advertised. Yes it was. 4 parts in the kit were wrong and the wrong parts have…
-
Many thanks to sonic potion for the total lack of answer to my inquiries or support since 2 month, after providing me wrong part in my expensive kit. you are welcome. Although he recognise his error in the metal case post, and provide me wr…
-
just so I understand right - the LEDs are all working, but you can't turn those on the pic off. so the buttons dont work. I attached a pic with the involved traces highlighted. in the end just an AVR pin that multiplexes the buttons for each col. d…
-
@Adrian is the new bottom part compatible with the prototype front? Then I could send @flo the prototype front so he does not have to desolder. @flo or you could send me the PCB to change the pots. how grave is the mess around the display?
-
great! thanks a lot! If somebody else needs replacement pots I will send them to you. Just drop me a mail.
-
the problem with multiple sample banks is that they have to be loaded into the flash memory each time and that takes a while and wears out the flash. the whole sample upload thing was more of a quick hack to use the unused leftover memory space on …
-
i'll update the manual accordingly. sorry for the confusion!
-
so I'm finally back and things have normalized a little bit over here. We had a nice, but very calm new years eve at home. My son loved his table fireworks and his sparklers and my daughter slept most of the evening.
-
so I'm back from the new years chaos I indeed supplied another type of pot with the newer LXR kits. It uses the polyshine metal pots that have a much nicer feel. I measured their absolute height and it was below 10mm, so they should fit. Where are…
-
yeah, those DIY projects are getting out of hand! :-o
-
nice. I like dubby stuff
-
sounds more like an AVR problem. AVR -> control surface Mainboard -> audio and sequencer to check the mainboard, connect via USB to a computer. if it is recognized the mainboard is working. is the bootloader doing anything? julian
-
more will be made and the error in the print will be corrected. But don't expect them to be available this year a rough assembly guide is online http://www.sonic-potions.com/metalAssembly
-
I have to ask adrian about it. there are currently 6 cases left. If nobody from the forum claims them until tonight I'm gonna announce them on twitter and the newsletter.