Möbius
About
- Username
- Möbius
- Joined
- Visits
- 8
- Last Active
- Roles
- Member
Comments
-
Hi! This sounds like bad solder junctions around the midi-jackets. You should ask your friend for resoldering theses junctions and check their conductivity. I would guess it is an easy fix.
-
Hi Brendan, thanks for your reply! is it just 'all' data types or are 'perfs' broken also? There's a couple things that could be going on here. I tested only 'all' data types so far, because it is the data type, which I use in general. After goin…
-
I switched to the original firmware and realized that presets saves as "all" with your firmware connot be loaded by the original firmware. Bad luck!
-
Hi Brendan, I have a problem using the CC for muting the voices on the global channel. It works for individual voices, but not for the global channel. I choosed channel 1 for the global channel and set all voices to channel 0. When I send "CC113 1/0…
-
Right, you need the card to store you data including your own sound and samples. I use a SanDisk 2GB, which works fine. A Transcent 16GB card was not working. But in general you should not have problems with smaller SD cards. Bigger SDHD cards can c…
-
Thanks for the hint, Brendan! I will try your procedure.
-
I was just dreaming a bit. The difference is that the transpose value is kind of quantized to full notes. This might be interesting and is a difference to the coarse target. I was also thinking about a probability option for the transpose tool, but…
-
Cool! :-)) Thanks for the hint. This transpose tool is just great and opens a lot of new possibilities. Just think of random values for the pattern generator, it's usage as a modulation target or a chord mode by copying the paramters from drum1 to d…
-
Howdy stranger, 1. I never had problems, but you should backup you SD card before. 2. From the wiki: you need a folder on the sd card named "samples" put some 16-bit mono wavefiles in there (not more than 490kB!) on the load screen there is a n…
-
No, I like this global switching behaviour of the transpose tool. What I wanted to suggest are individual transpose settings per pattern in the performance mode. You could then create a pattern, copy it to another pattern and transpose it quickly w…
-
Finally, I had some time to try out the new features and they are great! The routable custom buttons and the transpose tool are fantastic. Is it right that you have only half of the paramter range for the customs buttoms due to the symmetry of the p…
-
Cool, thank you! I will check it out at the weekend. Is the transpose amount saved with the kits or only when record is used?
-
Ok, now I got it! This would be great!
-
As far as I know, the only things that do affect the pitch of the voiceare the OSC settings and the step 'note' (the one next to velocity),where the step note may or may not correspond to the actual pitch produced - it should really be labelled so…
-
And my personal requests: - looping samples - when a sample is loaded to OSC, 'offset' controls sample start position. Added! I erased this entries: OSC: * Make Kick Oscillator's frequency range from to 0-127 HZ, value of zero effectively mutes t…
-
global note setting: I scratched my head over this for a while. Does this mean something like "move track note assignments from kit data to global data"? This is sensible and much easier to put into my custom FW now that kits are versioned. I'll get…
-
Add transient generator parameters to lfo destination can be deleted.... it's already there "> OK!
-
Updated!
-
The new filter model is a great feature! Thanks for sharing it! Brendan's firmware adds some nice features like one shot LFOs, load/save of individual voices and the possibility to copy idividual tracks between patterns. Of course this also opens n…
-
Great! :-)) Where is the difference of the new filter model compared to the old one? Is it planned to implement the features of Brendan's firmware?
-
Thanks for the hint. I never noticed this new option. I will test if it is related to the behaviour described above.
-
You are right. We should try to keep it simple. Changing the sequencer direction would be fantastic! Do you have a trigger extension? It would be great to be able to have "2" as a clock multiplier for the external clock. Would it also be possible …
-
Thank you so much!!! I will test it today. Yeah, you are right. Because it is only one sound source there can't be an interaction between the repeats and the original sound. But for short delays on a snare it might work. What do you think? I like t…
-
I like the step sequencer in the lxr a lot. Therefore, when I do a track I edit the patterns for the different voices directly on the lxr and then create a build-up by sending mutes/unmutes by an external sequencer to the lxr on it's global channel.…
-
It's the same for me. All of my channels are set to midichannel 0, but I trigger them by using channel 1. I think the "0" is there due to an old entry in the setup file. You can use the encoder to change it, but you won't be able to select the "0" a…
-
The new features are really nice. I will try it out. Thanks for your work!!! I tested the old version of your firmware and it was just great, that it is possible to select individual instruments now. But I had one big problem: Due to a lack of midi …
-
For me it's the same issue. I can navigate to the Trigger IO menu by using the encoder during the setup page is shown, but there is no direct access using the AEG button or any other button. I liked this direct access possability in the old firmware…
-
What about your Mystery Demo on soundcloud? https://soundcloud.com/sonic-potions/mysterydemo Is it related to Penrose? It sounds like a kind of pattern generator.
-
Have you checked the display connections?