Xirso
About
- Username
- Xirso
- Joined
- Visits
- 0
- Last Active
- Roles
- Member
Comments
-
It will certainly note help you... But, if the LXR accept the firmware update, it's a good thing. Sometimes, when I was updating my LXR I've also got chinese characters, never understand why. Finally, after a firmware update the LXR don't "work". Th…
-
Thanks, Perhaps look in (you certainly don't need me to know it, I try to see if I understand a bit of the code): void seq_triggerVoice(uint8_t voiceNr, uint8_t vol, uint8_t note) void seq_recordAutomation(uint8_t voice, uint8_t dest, uint8_t value)…
-
Thanks for the info, the video is now public
-
I try to record ALL tracks at once, triggering LXR voice's with midi. ONLY the selected track is recorded. It would be cool... To record the selected track in "voice mode" and record all the track in "perf mode"… Is this possible?
-
Wow!!! :^o
-
That's a good news, perhaps the pre-assembled modules will be diy too (or not?). I don't understand why this video is private, a mistake? I was so impatient to see and ear this... (
-
If you have already do the different voltage tests, insert all the IC in the good way, correctly connect the main board. Perhaps you forget to put the firmware on the sd card? Sorry, I can't help you better than that...
-
You will find it on github https://github.com/SonicPotions/Penrose. Download the zip file. Uncompress the file, the .wav is in the "bin" folder.
-
The trigger extension can output "trigger" or "gate". Press and hold shift, then Load/save, select with the encoder MOD parameter. Off = the trigger extension will output trigger, to trigger drum module, reset some lfo etc. On = the trigger extensi…
-
In another topic we speak over midi reading it could help you to understand how the LXR and midi work. http://forum.sonic-potions.com/discussion/comment/6803#Comment_6803 The answer for your question is certainly: In voice mode then mix then totally…
-
Congratulations all the best for you and your family, und "Guete Rutsch in neue Jahr"
-
In another old topic a user (sorry, can't remember who) find a workaround: select save mode, then change the value of the kit, then go back to load mode and select ok. That way you can choose the kit you want without loading other when you scroll to…
-
I add some features in the 0.36 firmware (only changing the code in menu.c file), using main-step and sub-step value to select a preset number or change the pattern repeat and next value. More details in the pdf. And the firmware and the menu.c file…
-
edit: Sorry, while I was writing this: "I don't think that you can do this without a computer between the nano and the lxr. But, it must be possible with a configurable midi controller with the midi out (not the usb/midi) connected to the midi in …
-
It would be strange that Julian change the kit, without changing the BOM or the assembly instructions. I would wait an answer from him, to be sure...
-
I haven't the knowledge to debug LXR built. But, reading your post, I ask myself what you mean by "some times" (when?) "the lights switch off" (all the lights? the LCD too?) "the sound stop." (all the sounds? the sound of voice 2?). More precisions …
-
What do you mean by "organize the memory"? You can save the content of the SD card on your harddrive. I never tried something else. Perhaps changing the three number after P... of the file name will change the order of the kit etc.
-
I have change my code concerning the edit mode. If your in edit mode, turning a pot will assign this parameter to this pot on the selected voice. So every time your in edit mode and turn a pot it will change the parameter assign to this pot on this …
-
I have find a way to use "hold shift and touch a pot". In the original code, if you are in voice mode, selecting a parameter with the encoder and press the encoder, will turn edit mode on, and turning a pot will quit edit mode. I have change this be…
-
I was writing that i can't wait to ear the filter...So...I stop writing...and turn on my LXR... I was thinking that the the filter was replaced, but there is a new filter type "LP2" >:D< Wow, changing the resonance value give another charact…
-
I'm a noob about memory or CPU usage. I ask myself the same question. In my representation every change that affect sounds parameter and must be calculated in real time and affect different things, "like forward, backward, random, ping-pong" for the…
-
To use the pots to change the original value of the parameter being modulated by the LFO. I will try to make it short. If I'm in edit mode and on the drum voice 3. When I turn the pot 1, the LFO will modulate the coarse parameter (not from the drum …
-
A feed-back about my test to send a modulation target to the LFO while in editmode. I was trying to send the currently selected parameter to the LFO target, but "try the smallest possible change you can think of and test that first", make me realize…
-
Have a look here => master/mainboard/LxrStm32/src/DSPAudio/lfo.c is were the LFO is coded. And perhaps give a look at the modification from brendanclark to have a one shot LFO. Perhaps it can give you some inspiration.
-
Thanks for the feedback, I was often using a wrong name to define knobs like potentiometer or encoder. "make sure you can get it to not kick you out of editModeActive on knob turn". I put the original code in a else{} at the end of my code, so the L…
-
I'm trying to learn the code too. My first goal is to use the for encoders while in editmode (after pressing the encoder) to tell the LXR that the active parameter become the LFO target of the same voice.My second goal is to use another encoder to c…
-
In your case, i will use an application on your computer who display the midi that your computer is receiving. midiox on Windows or sysex librarian on osx. Then configure the LXR to receive all, an then midi in routing to usb. So you can see what mi…
-
http://forum.sonic-potions.com/discussion/647/how-to-sent-midi-notes-from-ableton-sequencer-to-lxr-#Item_22 There are some explainations on midi channel in this topic. Perhaps it could help.
-
"It would be nice if u could set per drum voice track whether velocity attenuates the gate voltage amount."Reading this, you give me two ideas. First, to put the trigger out in a VCA and use it to change the "voltage amount" and then trigger my drum…
-
First of all, The LXR as a midi out port and it can act like a midi thru, but you must configure it.I think you misunderstand numbers of things, i will try to make it short:"Akai Rhythm Wolf (Gate Out) via the "Clk In"", a gate signal isn't normally…