linked volume and synthesis parameters are normal. since those tracks both trigger the same voice. the only difference is the decay time to generate closed and open hats.
the trigger outs on the other hand should not be linked (besides choking each other in gate mode)
I'll have a look when i rebuild my audio setup here. It is still everything not connected from the weekend out
Ok my mistake it seems it is the "choking" of two gates that causes this. I know this is different because I was running two SH-101's from the last 2 sequencer tracks and now since updating I can't do that anymore.
That must be it, thanks! I'll give it a try. You've done an amazing job on this, it is the heart of my live setup now, running 2 x101's, arp avatar, boss clap pedal, Jx-3p and syncing a CR-8000 via dinsync converter all clocking from the LXR.
Would be awesome to be able to load and save individual instruments and patterns into their respective slots rather than all 8 patterns or all 6 instruments at once
Comments
since those tracks both trigger the same voice.
the only difference is the decay time to generate closed and open hats.
the trigger outs on the other hand should not be linked (besides choking each other in gate mode)
I'll have a look when i rebuild my audio setup here. It is still everything not connected from the weekend out
I know this is different because I was running two SH-101's from the last 2 sequencer tracks and now since updating I can't do that anymore.
when you set it to 'off' the behaviour should be the same as before.
off = short trigger pulses
on = trigger length linked to volume EG