widdly
About
- Username
- widdly
- Joined
- Visits
- 58
- Last Active
- Roles
- Member
Comments
-
+1 for girts
-
aaah brainfart. I meant to post this on the preenfm forum. |)
-
You could follow the trace where the pad lifted to another soldered component and then solder in a little piece of fine hook up wire. Kind of like this... http://wiki.aussiearcade.com.au/images/4/4a/Pcb_repair_wardner_2_2.jpg
-
Interesting. I was thinking from an old fashioned x86 perspective. The M4 floating point stuff looks good. There is a tricky log approximation here..http://www.dspguru.com/book/export/html/62
-
Actually that wont be much quicker. You might try replacing the log and pow with lookup tables.
-
Also there are a lot of log pow and fabs calls that you could avoid. That will reduce the cpu load. I don't think you need the extra buffers either. //linear threshold in signed 16 bit so we can do fewer calls to log int16_t in_abs; int16_t th_li…
-
Lots of chance for divide by zero. If you initialize env as 0 and the time constants are too long it will be silent. I think env should be initialized as 1.0.
-
The Shruthi sequencer won't play unless it get's a note on message. I set a pattern aside on the LXR to trigger the shruthi sequencer. The lack of note-off's on the LXR means the shruthi sequencer never stops unless you change shruthi patches or ch…
-
I think mine were working. I will check again tonight. I had to reload them in the menu after upgrading.
-
The physical design looks great, especially the sloped front. Really looking forward to these. I like the anodized look. That would be sweet with the matching metal finish buttons. I've got one of Adrian's Shruthi cases in yellow and it is tota…
-
Nevermind. I see now that the MIDI numbering in the xlr starts at C0 so it is different to the counts in ableton.
-
Thanks for the update. I love the extra save options. Works really well with my setup. I think there is a bug with the midi note numbering when triggering notes from an external MIDI source. If I assign a voice to trigger on C3 it will trigger o…
-
Agreed! And congratulations on your successful build.
-
of course one could always diy a thru box... for example like this: http://midisizer.files.wordpress.com/2013/01/midithru.pdf all it takes is basically a hex inverter, optocouper and a bunch of resistors I've built a number of these. A real li…
-
) Awesome! Thanks for the update julian. My LXR is rocking the Teardrop rimshot and a bunch of Amen slices. This adds a whole new dimension. http://soundcloud.com/widdly/lxr-sampools
-
I think it might be related to the sd card. I was using a 256mb one which was working fine. Then it stopped working and wasn't detected. After this it displayed the "Mix mix mix mix" thing. It checked the card in a PC, scanned it for errors an…
-
I had the same exact same issue with mine ("Mix mix mix" display and garbage on lcd after clicking encoder ). I reinstalled the firmware which fixed it. However, the same thing happened a second time a few days later. Is the cause of this known?
-
Stutter would be great. I like the idea of having a way of adding and removing notes from the pattern.
-
I think 4 bits for probability and random would work great. I certainly can't hear the difference between all 127 values for the current probability. Doing with an LFO certainly works but to my thinking, the randomness should be part of the pattern…
-
Finished mine last night! The attention to detail in the design, layout and documentation made the whole build a pleasure. I'm totally blown away by all the features. I think my TR909 is might get dusty on a shelf now the LXR is here.