void
About
- Username
- void
- Joined
- Visits
- 24
- Last Active
- Roles
- Member
Comments
-
I have a number left over from x0xb0x builds - They are also the same unit as used on the midibox mbseq units. Off the top of my head, i cant recall the part number, but, if you look on the adafruit website, it is listed there.They are available …
-
Might be because i made the case as small as possible? Ive never seen one of the acrylic ones in the flesh, but the clearance around the pcb on this case is as small as i felt comfortable with (about 4mm IIRC?) In the photo of the corner, you can se…
-
There's three things on the panel that you may (or may not!) be looking at - a) the stainless steel allen cap boltsb) the leds that came with the kit (coloured)c) some mounting holes that dont have the stainless bolts in place when the photo was ta…
-
How have you managed to change the angle between the top surface and the rear of the machine? What i mean is - The I/O is on the main board, so at 90 degrees to the work surface, whilst, on your machine, the rear is at
-
If i format the SD card / copy the files in different ways, i get different results (when i try to update the firmware). None of them give a working machine : ( but there are differences with different methods of preparing the card. This makes me …
-
Sadly, this can not be done using the bootloader, but it is possible using an ISP adapter, like for example the USBASP. They can be ordered on ebay for 3 Euros from China. Is this the sort of thing you mean - If so, i shall buy one. My LXR is…
-
How do you program the chips? Its been some time since ive programmed one (long enough to loose my programmer's cable!) but, as i recall, there's two ways with Atmel Studio - one way has the individual parts, and you set all the details, and then, …
-
re: copyright someone posted this on one of the forums the other day - longish, but you can just listen (no visual)
-
I have not been able to find the serial cable for my STK500 yet, however, i have further developments - I previously 'quick formatted' the SD card. On the off-chance it would make a difference, i full formatted it (on windows 7) - FAT32 with the …
-
sure - will do. its been a while since ive used the STK500 card, and, now that i go to plug it in, i realise that my computer no longer has a serial port. just downloading AVRStudio onto another computer, and then should have some action.
-
Well... Ive killed it. I tried updating the firmware. I downloaded 0.23 from GitHub. Tried to flash that twice. Same result each time - Some mangled writing, some legible, but, in the end, no good result. Then - I downloaded the SD card z…