owensands
About
- Username
- owensands
- Joined
- Visits
- 68
- Last Active
- Roles
- Member
Comments
-
Any word on this? .32 is pretty much unusable for me without shuffle as the LXR is always synched to my a4.
-
modular but .32 has a shuffle bug when synched to external midi time code. It dosen't work. Can you look at this please julian!
-
Sweet!
-
Actually I was wrong. I thought I had reinstalled .32 but was still on .28. I reinstalled .32 and I confirmed that shuffle doesn't work if receiving midi clock from my analog four.
-
Still broken. I mis-spoke.
-
Ok I couldn't wait. You nailed it. This is exactly what I was requesting! Its perfect. You just made the trigger riot(on steroids) inside the LXR! lol Sick man just sick. What a piece of gear!
-
Sick! I just got the expansion today and put it together been messing with it all night(with .30) and it works great but just saw this update! Nasty! Haha ask and you shall receive eh? Thanks Julian! Will update firmware tomorrow and give it a go!
-
Anything to vary the pulsewidth of the trigger or gate would be amazing. Check out the docmentation for the trigger riot pulse width features. http://www.tiptopaudio.com/manuals/triggerriot.pdf If there is an easy way to implement this functionali…
-
+1000 Would be great.
-
Agreed when holding down the step I should see the exact values of that step. Just like the analog 4 does. Would be great!
-
Oh man this is excellent. I have wanted this! Metropolis eurorack sequencer can do this as well as the analog 4. Good stuff! Not only is is s great feature for performance but its also great for finding different patterns when writing beats.
-
haven't setup my trigger expansion yet but I was wondering if there is an option to change the pulse width of the trigger pulse per track. Would be sick if we could do p locks with pulse width too in the future. Looking to replace my trigger riot wi…
-
works for me clocked from ableton 9.
-
So no more kits we have to source the parts? Kits seem to be a bit cheaper then sourcing from mouser.
-
Yep and this is why I like to attenuate before it because I am using the gain on the great rivers. About 20-25db in fact and I also change the impedance and load settings as well for different tones(as well as soft clipping the inputs, the great riv…
-
Thanks man thats great! Good techno all over your soundcloud thanks for the share.
-
Nice! Did you add the delay or is that LXR? The delay is from the analog 4 using its external inputs. I have the alternate outs on my mackie board piped into the analog 4 so for any channel on the board I can hit the alt 3/4 out and then the sound …
-
Sounds brilliant! I'm currently looking into building some preamps and just out of curiosity how do you deal with gain staging when running a drum machine through a preamp. I've only ever used preamps with mic's not line level sources. Thanks! I run…
-
i built an ambika, too. .. destroyed an expensive optrex display in the process. ...and a few pads when desoldering it hehe that sucks. Mine fired up first time no issues. I was shocked actually haha. Shruthi had a bad IC when I first fired it u…
-
10k ohm or 10 ohm? I would assume 10 on the meter is 10k if the 220ohm networks read .221
-
all resoldered also desoldered the AVR socket and resoldered. Buttons still all dead. Almost 99% sure there is something wrong with this PCB. Ive spent about twice the amount of time on this ridiculously easy project now compared to the Ambika I bui…
-
Ok ill try to re-solder all 10k resistors but I just checked them all from the bottom on ohmmeter and they read 10. Also I pulled all the 595s and checked them one by one in my shruthi like I did the 165s. All of them good to go. I also did an ohm t…
-
Well I mean the behavior if just U2 and u5 in is very weird too. What should happen when those two ICs are in alone with just all the 595's and the 4050? Should it definitively work for a few controls? Because right now its just spastic and sporadic…
-
btw this is the PSU im using too. Want to make sure its right. http://www.adafruit.com/products/63#Description
-
Ok got the new networks and popped them and as you can only guess the buttons still don't work. LEDs all seem to be fine now though as I can take out all the button ICs(165s) except the first one in the chain and I can press the first trigger button…
-
Well I built an ambika so I'm kinda over the mass resistor thing lol
-
I think so. Not entirely sure as I need to wait for the right LED resistor networks to come. It was the only item on your BOM that wasnt filled in so I didnt order the right ones by my mistake. Here it is at mouser if you want to add it to your BOM…
-
Yeah so I removed just the RR4 network and put a single 220 into the voice button led and now that LED lights on boot. So I ordered the right networks from mouser and Ill report back when I replace them. I just cut them right off from the top and pu…
-
After reading what I wrote I think this is the issue lol. I used the wrong networks. 220kohms instead of 220ohm.
-
Here is the 220k ohm resistor networks I used. http://www.mouser.com/Search/ProductDetail.aspx?R=4609X-101-224LFvirtualkey65210000virtualkey652-4609X-1LF-220K And the 10k ones are the ones from mouser on the BOM. The bom didnt have the 220k ohms o…