loderbast
About
- Username
- loderbast
- Joined
- Visits
- 577
- Last Active
- Roles
- Member
Comments
-
10k ohm or 10 ohm?
-
just watched you video after my last post. gave me another idea: please check r8,r9,r26,r64,r60 pulldown resistors. (especially r9 if you have only u2 and u5 inserted) if there is something wrong with them (not soldered right or missing), randome …
-
your 595s look fine to me. sd card shouldn't matter to the buttons. crystal is fine i think. if there was a problem there, the whole thing shouldn't boot up at all. if there are some 165 missing at the end of the serial chain the serial input (pi…
-
that looks nice.
-
that psu is fine. so the problem happens when you put in a ic in u6 or u10 no matter which ones of your ics? would it be possible to get you friend to probe the digital lines of that serrial bus again? maybe put in one ic at a time to narrow the p…
-
A: no there is not only one, but multiple (127? - not sure) Pattern Sets (and also kits) per Card. B: save:press "load/save" until it says save. press encoder so that ">" sign shows up. navigate the ">" sign to edit what to save (patch, kit,…
-
Happy new year !
-
there is not that much to it. the buttons have the resistor networks for pulldown. then go to 74hc165 parallel to serrial shift registers which are chained togeter then go directly to the atmega. with the leds its kind of the other way around : atm…
-
@implant: some of the stuff is indeed crazy beyond usability, but some stuff is really great. i use my gvs (1bit video sampler) all the time and even build another one from an arduino with his schematics. not many people are doing video though - …
-
@julian: nice! i did a lot of eurorack diy in 2013. still some troubleshouting to do, but i have a all diy (except braids) modular system now. @implant: are you aware of gijs giskes stuff? its as weird as it gets..
-
@julian: i have a ibook g4 with live 7 which i can reproduce the problem with. i can lend it to you to sort this out. i need it until 11.01.14, but after that you can keep it until you sorted out the problem. we could meet in ffm or i could bring i…
-
nice using the amp envolope was exactly what i meant. i imagine it to be usefull for drums that are not triggered, but use for exapmle an env->vca setup.
-
nice. the people over at devsound are also having a "acid december" project again. http://devsound.se/2013/acid-december-2013 so thats plenty of acid for the next two month.
-
on a related matter: can anybody name a synth that actually uses note off velocity?. (like vca env release for example) i have never seen it in any modulation matrix or noticed it beeing used.
-
i am with fcd on the master volume. some kind of global page, "mixer" page or something like the performance page on the ambika is a nice idea though.
-
have a look at the power supply part of a shruthi filter board. you could hack up something like tsv suggested, on a little bit of pearfboard. but simpler basically lt1054 and a bunch of caps. depending on your input voltage you don't even need reg…
-
.there might be a pcb run for kvitekp midithru boards happening here...
-
I did not know it is backwards on the official case. Changing it makes sensé to me now.
-
of course one could always diy a thru box... for example like this: http://midisizer.files.wordpress.com/2013/01/midithru.pdf all it takes is basically a hex inverter, optocouper and a bunch of resistors
-
you also might want to resolder the pins of the optocoupler and the diode and resistors around it. (its what handles midi in)
-
i think the PT2399 stuff would be easier done externaly. just build this or something like that. there is no digital control anyways so whats the benefit of building it inside? you would have to find space and drill holes for extra pots etc...
-
just had a little test. it works great even for chopped up drumbreaks :-S
-
awesome. got to dig out my breakbeat collection
-
makes sense to me as is.
-
looks good on android now, too. (at least on mine)
-
nice i also like the website. whats this ?
-
try a powewr supply with at least 600 mA
-
the sd-card should either work or give error message