Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

just

About

Username
just
Joined
Visits
321
Last Active
Roles
Member

Comments

  • I'm interested in this as well, since the octatrack is my goto sequencer. Has any of you tried running the octa midi data through a filter? Otherwise I will give it a go through my iconnectmidi4+ when I get my LXR back. A friend of mine borrowed it,…
  • ^ What newnoise says, arround 100€. Sorry mr_chielos, did not see your post till now.
  • Thanks @newnoise The wood is 12mm thick and the overall size is W:287mm D:148mm. The hight was freestyled, so not sure about that. I build the frontpanel based on the 12mm wood, so everything is real tight and there is only like 0.5mm gap between …
  • Thanks husker, I'll might give it a try. BTW in my part of the world (Denmark) that stuff is called "Elephant snot" (insert animated facepalming yellow smiley icon here) Don't ask why.
  • @bassFant you are spot on. Everyting is still 90 deg to the front panel. Only the bottom is angled, making the whole thing lean a bit forward, which I realy like. I'll post some more pictures when I have finished the last details. Right now everyth…
  • Sounds better though @vasculator, yes I was considering that as well. Thanks
  • Thanks guys, glad you like it. The body is made from an old piece of rosewood I found. The rough cuts were done on a band saw  and finished on the disc sander. Then the pieces were glued together, sanded and finally waxed. And yes, the knobs I sto…
  • Couldn't attach it as a .fpd, but zipping it helped I think.
  • Thanks, and yes the frontplate is Schaeffer.