egnouf
About
- Username
- egnouf
- Joined
- Visits
- 187
- Last Active
- Roles
- Member
Comments
-
oki, I am going if I can tommorrow to look at your commands. @pld if you could put somewhere your makefile, I would like to have a look at it :-) thanks guys, I really appreciate your patience with me :-)
-
@pld thanks for the hint about the cproject in eclipse, I am going to look at this :-)
-
I am on MAC (and may be soon I may move for Linux) but anyway, If I can compile with MAkefile, I take Makefiles :-) I am lookgin forward to get the pld make files for MAC :-)))))) regards!
-
I continue to try things ;-) I added a SYMBOL --> __AVR__ATMEGA644__ in eclipse the code compils until i get the error: In file included from ../Preset/../Menu/menu.h:16:0, from ../Preset/../Menu/CcNr2Text.h:12, …
-
ok, here is the command i have : arm-none-eabi-gcc -mcpu=cortex-m4 -mthumb O2 -g -DF_CPU=20000000UL -D__PROG_TYPES_COMPAT__ -I/usr/local/CrossPack-AVR-20131216/avr/include -std=gnu11 -MMD -MP -MF"Preset/presetManager.d" -MT"Preset/presetManage…
-
here is my version ;-) #include "../config.h" #include "PresetManager.h" #include "../Hardware/SD/ff.h" #include #include "../Menu/CcNr2Text.h" #include "../Menu/menu.h" #include #include "../Hardware/lcd.h" #include #include "../frontPanelParse…
-
I found a way to open the CPROJECT.. on my side, I did change the references to C:/ and I changed some of the headers containing path with '/'. I think now I should complete the gcc-arm command line with option '-MCU=ATMEGA644" etc.. anyone knows w…
-
good idea to change the .cproject. I am not a specialist of eclipse, can you tell me how can I see in eclipse the .cproject? cheers.
-
I confirm: i should compile using cortex-m4 :-)
-
changing to cortex-m4 and rebuild brings me new errors (inlude not find for AVR code) that may comes due to strange headers in the code: #include "../config.h" #include "PresetManager.h" #include "../Hardware\SD/ff.h" #include #include "../Menu/Cc…
-
oki, i will look further. -mcpu=cortex-m4 -> you may be right ! i will cha,ge it in the toolchain settings :-) thx!
-
little by little , i guess that i progress ... hum, things seems to compile but i get the following error now (i had 550 errors, i have only 3 by now) : make all Building file: ../src/Sequencer/EuklidGenerator.c Invoking: Cross ARM C Compiler arm-…
-
by the way, in the "drum" folder i don't have the "release" folder where as in AVR folder, the "release" folder exists (with files). can you help ? cheers
-
I am okay with ARCH linux (I was this morning downloading it!!) . Openbox, I don't know what is it.. I will look at it and install it :-)
-
Meanwhile, I continue on my MACOS installation :-) I reinstalled everything :-) and followed what mentionned in this thread: http://forum.sonic-potions.com/discussion/306/building-firmware-on-osx#Item_18 I did the instruction to check my PATH and …
-
Would be execellent if the Linux guys as created an image :-) like this I just have to work it :-)
-
Hello guys! thanks a lot for your discussion here as I think for my MAC OS I went a step forward in the compilation process under eclipse, I donot have errors but inly a message: **** Build of configuration Release for project DrumSynth_FPU **** …
-
By the way for CS-MAKE, I found in eclipse the setting that mentionned the command to build the project using this command (see scrennshot, I removed it for the moment).
-
Hello, this morning, I got this issue when building the firmware (see the screen shot) I have two issues: 1- "cs-make" not found -> I guess its normal as I am on MAC .. but what should I should i use instead? 2- Next, I have 4 warning about PATH…
-
i am thinking to install a linux :-) on my virtual box, it seem easier to make the build :-)
-
yes, I agree with sammy123 (i have both). the shruti sound level is hot ! :-)
-
by the way, i am not as experienced as you in the MAC development :-( not so good with eclipse configuration, a nightmare for me, too many option in eclipse!
-
hello, I use an MOTU 828 MKIII, and te sound of the LXR is really punchy :-) the MOTU includes a reverb and nice compressor :-) regards.
-
oki, i will. i prepared an "how to for mac" , but when i posted this thread , i did very very simple and "dirty" , i will update this thread with more details soon :-)
-
Hellooo! I am trying to build/compile on my Mac (xcode, make tool, lastest eclipse).. well not easy as i need avr packages for the macintosh .. well i keep you inform on my progress ... hard!!
-
thx !!!!
-
in the end i ordered the following item: http://www.reichelt.de/Universal-Power-Supplies/MW-3N06GS/3/index.html?&ACTION=3&LA=2&ARTICLE=87338&GROUPID=4945&artnr=MW+3N06GS
-
-
thanks ! I will start looking at that :-) it gives me good direction to understand the code! :-)
-
very nice shop and advice from them (I spoke to them on the phone and give me good advices). thanks again!