Paulus
About
- Username
- Paulus
- Joined
- Visits
- 468
- Last Active
- Roles
- Member
Comments
-
News: I tried to do the firmware update, no luck: It shows a "SD card init error".I tried to format the card again and again, and in FAT32, I still have the same issue with loading the samples.There is also the screen problem, not sur if these two a…
-
Hello zthee, I'm having the exact same trouble at the moment, so I thought I could second that.For me, when I try to do the firmware update, it also come up with a "SD card intit problem", not sure if the same happens to you…
-
Will do then!I'm currently away from my LXR, but I'll try that and report back next week!Thanks again!
-
Thanks @mixrasta So basically I should try to do the firmware update? The AVR was flashed by Julian (I bought it from the shop) so I assumed there is the last firmware on it…I will double check the caps around the quartz, but I already did…
-
Congrats!Enjoy your new LXR!I'm just discovering mine!
-
bump…
-
MORE NEWS: Still the same with the boot problem, but I also tried to load some samples on the sd card.When I load them via the load samples menu, the sd card become unrecognizable by the LXR and I have to reboot the unit. Precisions: I use a 512mb S…
-
I reflowed some points on the connector of the screen and around the 20mhz crystal.Still the same issue…I saw somewhere on the forum that Julian mentioned that the weird chinese symbols indicate a reboot and that Newhaven displays does not like it… …
-
@matrix12xThanks for your answer, I'll go over the solder joint to check if some looks suspicious to deserve a new solder point.
-
Rectification, the unit seems to work anyway when the screen is blocked on these symbols.
-
Thanks!In the meantime, I'm reading the assembly instructions again and again. At least, I will know it it by heart and be prepared!
-
Well now it is frustrating, I have everything to build my LXR and I have been waiting for that since 6 month aaannnd my right hand is under a ton of bandages… Had an accident and won't be able to wield a soldering iron before 1 or two month… damn…
-
Great deal! Thanks mate! :-S
-
Hey, I'd be interested. I'm based in France.
-
Great, thanks a lot Julian!I can't wait to start building this amazing little beast!
-
Thanks for both your answers.@cj55, silly me, I did not find where to buy the programmed atmega.@julian, this might be a solution, I like to learn new things!And I guess it can be found useful in the future if I build more Shruthis, LXRs or other DI…