Envelope
About
- Username
- Envelope
- Joined
- Visits
- 35
- Last Active
- Roles
- Member
Comments
-
Changing the jumpers to V-Trig and it works fine... mistake on my part.
-
I set notes on Voice 1. Now i change the jumper to V-Trig and test the gear again.
-
I have ordered the additional parts at reichelt. I put the cable in Trigger Out 1 and then in the Sequencer Trigger In of a JX3P. I tested with an A4 of Elektron and all works fine. I put the jumper on the right two pins which are labeld "STRIG".…
-
I have soldered the trigger board today, but it doesn't work. If i put a trigger of any outs into the sequencer trigger in of my vintage gear i hear continuously the tone but the sequencer doesn' start. Gesendet von meinem HTC One S mit Tapatalk
-
Are the parts for the S-trigger additional or must I omit parts from the kit?
-
And sometimes a play around with the sample rate decimation per voice and the global sampel decimation.
-
Julian..it is only your drumsynth and the tape recorder and maybe a littel bit of tape saturation. so simple but fantastic in my opinion :-))
-
Awesome...where can i get the 707 sample kit and how to transfer the samples or any other in the lxr?
-
I have the same issue at the three drum sounds. If i press the mix page button i get a line of 8 "mix" parameters too.
-
after format the card i can save and load...you answered me in the other thread: it´s not a bug, it´s a feature! but i think cause i don´t formated the card after buying there was anything wrong. although there was written: fat32 formated. the re…
-
ok... it´s a feature. good to know ;-) i think so...you should write it more than big!!!
-
if the sequencer is not running, loading pattern works!
-
For example: Kit: Mochito Voice 6 hh Lfo: destination "ch" If i set to "ch", all sounds totally quiet. Gesendet von meinem HTC One S mit Tapatalk 4
-
After format SD i see now the dialogue and the counter. But it i want to load the saved pattern there is nothing. Gesendet von meinem HTC One S mit Tapatalk 4
-
After format SD card the Lfo works fine. Gesendet von meinem HTC One S mit Tapatalk 4
-
I have the same Problem...sorry for double posting! In use are a 8 GB SDHC. - i can load kits - i can´t save pattern, only this make problems! - No progress bar is working - Sometimes the rows are reversed...in first row is standing the patter…
-
Yes that's right, after insert the SD Card is the error gone!