matrix12x

Comments

• These kits sound great!! Thanks @bjornf.

  in The LXR doing an TR-808 interpretation Comment by matrix12x March 2017
• The Marimba version of the OS is awesome. I love playing with the FX and randomize. I am also looking forward to the update, and I also hope it includes the copy voice parts from Brendan Clark.

  in LXR Marimba: a new unofficial firmware :-) Comment by matrix12x November 2014
• I had this when I had some bad solder joints on the screen's connector the the PCB and a bad solder joint around the caps near the 20MHz xtal.

  in Weird symbols on the screen on boot (SD card trouble solved) Comment by matrix12x November 2014
• I figured it out. When I checked the switch pin on the output jacks, I remember reading they should measure 5VDC when a jack is plugged in. I was measuring 2.2VDC. This made m think possibly the reference for my meter reading was somehow off, so I s…

  in boots ok then a minute later crazy characters on OLED Comment by matrix12x October 2014
• ok, reseated the AVR, and reflowed anything that looked he least but suspect. I think it may have been one leg on the caps that are for the xtal. no more crashing, just no sounds. I have the main board attached, sd card inserted, hit start add some …

  in boots ok then a minute later crazy characters on OLED Comment by matrix12x October 2014
• ok, I tried a second SD card, and still the same issue. If I remove the main board it does not crash.If I hold down the encoder while booting, it has no issues going into boot loader and letting me update the OS. I am using a +12V 1.2A power supply,…

  in boots ok then a minute later crazy characters on OLED Comment by matrix12x October 2014
• I was thinking a simple distortion/overdrive would be cool.

  in What about FXs like delay and reverbs? Comment by matrix12x August 2014