nnbveh
About
- Username
- nnbveh
- Joined
- Visits
- 16
- Last Active
- Roles
- Member
Comments
-
i think it says 1/2, don't have it right in front of me, sorry...Would be nice to hear something from developer, i know he's busy with that new trigger thing, but still...
-
What happens when you power up the LXR while the encoder is pressed? What is the display showing? Any message? *SD card OK' or something like that and then it start to update, but never finishes... If there's no firmware file then 'file n'
-
well, now it's bigger then just sample loading problem, sequencer doesn't start at all, and can't re-flash the firmware anymore...and no sign of developer responding in any form, doesn't it say 'bug reports' in the tags of this topic??
-
something happened after latest firmware update with my machine, it doesn't update anymore, no matter if i try the official build or alternative one... it is not about the card, tried with few, and machine itself functioning perfectly, just doesn't …
-
hi. I couldn't upload the samples, machine was stuck on loading screen, so i decided to try official firmware. Didn't work either, but now i can't update to the custom firmware anymore, lights are blinking slowly, but it never ends...all my stuff st…
-
cool, now i have some mnemonic )
-
Re-flashing worked, now all LEDs are in order, thanks. I actually have that alternative firmware, maybe the bug is only in it,dunno.
-
yes, i should try reflashing! thanks for the idea.
-
yes, my first thought was that i'm in some kind of mode where the lights should be off, but no, i'm in the step programming mode, and the step lights should go on or off when i turn on or off the steps, but they don't, not any more, even though for …
-
Hello, i'm thinking of cutting the case myself and have a little question: i was sourcing the parts myself, and my encoder is little lower then pots, about 5 mm i guess, is it normal or i've got the wrong part and will have to modify the case so the…
-
have changed the IC's, all the LED's started to work, but after half an hour sequencer row stopped to light up when in voice mode...LED's are still working when i go to the step edit mode, so if i press one step it blinks. What could it be? Thanks!
-
updated firmware and the top row of LEDs is on now, weird, considering i've got totally wrong IC's... gonna get right ones next week, blinking lights...
-
haha, yes, i've missed the 'weight' part)) no, it is not italian Lira, but swedish Krona, something similar)
-
will these work? https://www.elfa.se/elfa3~se_en/elfa/init.do?item=73-796-01&toc=0&q=74HC595
-
This is the 595 Pinout: This is the 8574xx4094 Pinout: As you might spot, besides the Positive Supply Voltage and the negative Supply Voltage (in case of the 595 its GND) these parts have nothing in common besides the fact they are 14 Pin DIL Chip…
-
haha, i like this screwdriver vs bucket wheel excavator comparison)) even though i think it might be a bit exaggerated,no?i maybe should've ask before order things stuff though) but i've compared the data, and they looked like the same thing basical…
-
Just remembered that there was no 595's in stock, i've got these instead: http://se.mouser.com/ProductDetail/STMicroelectronics/M74HC4094B1R/?qs=sGAEpiMZZMtsbn1GaJyslxOUL8ggBi%2bRxjTjSCzABc8= they seem to be identical, but maybe they not...