cube48
About
- Username
- cube48
- Joined
- Visits
- 222
- Last Active
- Roles
- Member
Comments
-
Kinda late and not on topic but I've made whole AKWF collection ready for E-MU Ultra >- http://samplersonacid.com/forum/viewtopic.php?id=80
-
Simple de-soldering iron costs ~20 EUR. The 'investment' into one is priceless and it's not more difficult than soldering then. I had some issues with my LXR after moving the guts from Acrylic case into metal one. Some hidden cold joints appeared b…
-
@brendanclarke: Is your hosting down? I get 404 error when trying to reach your page with files.
-
You would need a 'USB host' in between, something that will 'translate' to/from MIDI/USB MIDI. I.e. Kenton USB Host or one of the iConnectMIDI boxes. I have iConnectMIDI4+ and can't be happier with it. Really flexible MIDI patchbay/merger/filter/re-…
-
Save two of the same patches in different slots, change one voice on one patch. Now morph! I agree though, it would be cool to be able to just save individual voices for morphing etc. Yeah, this is for sure possible workaround but it's not really …
-
First thing to check is that you don't have set any specific 'global' channel. It should remain at '0' so it doesn't override the individual voice channels. At least this is my experience. Concerning your snare filter example ... make sure the filte…
-
Wow, the new effects sound really good! This will nicely expand the sonic palette of LXR. Keep it up! Do you use custom samples in LXR or is it another box I hear in your demo?
-
Does that mean that you can turn LXR into FX box just by using another SD card with different firmware? I guess that merging some stuff into LXR FW is not possible due to memory restriction, right?
-
Isn't it already possible since some of the later FW versions to do this with Program Change/Bank Change? Or are these only for switching Kits? Maybe I'm just having vague memory from other threads where this thing was discussed. Have to try it when…
-
Yes, light pipes are included.
-
Thank you guys for the dimensions. Looking forward to re-dress my LXR.
-
@KungFuDaz: Case looks awesome! Congratz to your build. Could you please do me a favor and measure the dimensions of the case (without knobs etc.)? My case is delayed but I'm now designing some multi unit stand and want to know if it will match to…
-
Awesome idea! This would be cool even with given percussion oriented synth engine.
-
Another track with LXR drums exclusively.
-
girts +1
-
I wonder if the width matches Elektron's machinery. It looks like they could pair up nicely in custom made stands.
-
Yes, +1 for Kit and MorphKit being loaded together.
-
Morphing on CC1 (MW) would be awesome! I miss that one desperately. Concerning drumkits, there was a discussion in other thread. Issue was to keep the consistence with current switching of patterns via Program Changes, to have both accessible throu…
-
Squirts wrote: Please put me down for one when they are ready +1
-
+1 vote for multi-channel recording
-
Thanks! Yes, Atari forever! :-D
-
It seems that sync to external MIDI is still broken. Or is something else needed to set in the routing except BPM to 0? Thanks for the updates!
-
Another tune with LXR playing all drums, synced to Atari ST which feeds the Virus TI2 with other synthlines.
-
This is awesome! Looking forward to try that out. Thanks!
-
@borfo: Make sure that the tape stripe is wide as the switch tip it self. Also make it short so it covers the switch tip only and doesn't go under the cap. Then it stays clicky-clacky. It also helped to keep those cap square brackets aligned with th…
-
Ahh ... it seems that I should've posted my roll idea rather here then elsewhere. It's quite similar to widdly's. What if: Button 8 works as modifier and when held together with one of the buttons 1-7 it changes the roll to nearest triplets of the…
-
At my unit when I set LFO destination to the last "mix" option (of all available) LXR stops playing and can't be run again. I can just turn off individual steps (LEDs go dark) but can't turn them on. Play button doesn't react althoug it's LED can be…
-
Thanks! Another idea (not even request or proposal) related to Performance mode. Currently the buttons 8-16 are unused. What if: Button 8 works as modifier and when held together with one of the buttons 1-7 it changes the roll to nearest triplets…
-
One little usability request. On the parameter detail page (the one where you see full parameter name and it's value), it would be cool to let the encoder jump by value of 10 while holding the Shift button to scroll faster to required value. It b…
-
Another finished unit here. Took me around 5 hours. Unfortunately I had one hour only to play with it so far. As I read the manual quite some time ago I didn't unleashed it's potential yet but love it's on-the-fly tweakability. Thank you Julian!