Adrian
About
- Username
- Adrian
- Joined
- Visits
- 61
- Last Active
- Roles
- Member
Comments
-
Revision updates: decals at the back correctedU6 hole in fastening plate modifiedadded openings for taller potentiometers into fastening platewindow will include transparent double sided tape (no more messing with glue)enlarged openings around light…
-
@tb323 yes these are the ones. M3 female to male. I could include them in next batch.
-
@zoneswithoutpeople this pot problem will be solved with small design change.
-
Congrats Julian!
-
@julian the proto face plate won't fit to first run cases.
-
Now there is 2mm fix plate welded below face plate. 10mm is distance from face plate bottom to PCB.I can make opening for the pot's so there will be 10mm room for them, so you can include these potentiometers with KIT. But first batch cases had 8mm,…
-
The case designed for lower plastic pots. For new version I can add a bigger hole into fastening plate. But for now only fix is to use lower potentiometers what I mentioned before. @flo I can send you 4pcs and some desoldering stuff. @mongrol do yo…
-
I'll make changes in new revision and add more room for pots.
-
Good that you managed to assemble it, but the idea is that I\O board will be fixed to main PCB with 3 spacers.
-
@richie this something what I'm looking now. I'm looking some tinted foil, like on cars.Idea is the same, that it will be glued under the LCD window and glass will be glued onto it. If I'll find something and somebody who will cut it for me, then I …
-
yes there is protective foil on both sides of the window what should be removed.
-
I think it's mounted correctly, but it's different type. In one type there will be 10mm other type 6,8mm from mounting surface to the top.Datasheets.10mm6,8mm 6,8mm is the one what is used in Shruthi, Ambika and in LXR BOM. It may be +/- some fracti…
-
mongrol I assume that you have some other than included with KIT. I know some metal shaft threaded pots have this type of construction. I'll keep that in mind and new version will have a cutout in fastening plate.Also I'll make U6 cutout bigger to …
-
@richie it's hard to remove it. But whatever you do, don't use acetone. Maybe the most easiest and good looking would be just a fine cut of electrical tape.
-
They will be sold in SP store. Price is not clear.I'll keep you updated when there is something to share. For now I'm waiting some parts to arrive to start the assembly.
-
Visited print shop. They started printing and will finish tomorrow.Then follows assembly, KIT preparations and packing.Video1Video2
-
Cases are now in print shop.
-
last update was yesterday, that the metal will be manufactured this week.
-
Things are moving. Protos OK, making order in Monday.
-
Yes there are light pipes. From one side comes light pipe LMC020 and from other side rubber fastener RTN100.LED's should be soldered to PCB without spacers.
-
Aah yes and cases will be sold in SP store. @ablearcher you can build LXR. Later it takes 10 minutes to fit it into metal enclosure. PS: I had metal cases for Anushri also.
-
Protos received and most things are OK, only 2 small changes needed to be done. Now there are vacation time problems, but I try to push to get them as fast as possible. 01iv3r Shruthi is done, preen FM 2 is done by my ex partner, MidiSizer is on pi…
-
yeah this is getting ridiculously long, but (hopefully last) protos are painted now and I'll get them in end of this week.
-
Slowly moving forward. Hope to get some things clear this week.
-
This is getting ridiculous. I'm getting delivery times like next Friday, next Friday today it was don't know if will manage for next Friday. working on it.
-
This project has the most prototypes I have ever made for one case.Working on screen print tone and welding quality. Cases will be sold in SP store.
-
lmc020ctp, lpc020ctp are possible keywords where to start.
-
Another proto run is in manufacturing. They should be ready next week. If they are OK, then it takes another minimum 2 weeks to make the first production.
-
No other colors planned.
-
Here are the print samples.In future there will be no fastening holes and no chost rings in face plate. There will be welded extra mounting plate for fixing PCB and the case. Also the faceplate will be slightly lighter.