n0rd
About
- Username
- n0rd
- Joined
- Visits
- 34
- Last Active
- Roles
- Member
Comments
-
Those numbers appear to be related to what you originally stated in 2) and that Penrose step is not calibrated close enough to 1/12. (ie it's slightly higher). So after a few octaves, the cumulative effect of the slightly larger step means it quanti…
-
1) If you are getting gates at different times to which the LED on Penrose shows then something isn't right. 3) Sending 8V to Penrose and it quantising to D8 (and not C8) suggests that Penrose needs re-calibration. It suggests that each Penrose st…
-
1) On your vids, the LED on Penrose appears to be working correctly, indicating when you should be getting a gate. What version PCB do you have? Check out this thread: Altering the Penrose Gate voltage. 3) Re-calibrate Penrose using BSP as input.
-
1) "GATE" should output a gate on a note change when there's no cable plugged into "TRIG". (The LED on Penrose should show when a gate is outputted). When there's a cable plugged into "TRIG", the "GATE" will only output when there's a note change an…
-
I've also been playing with the source code and managed to come up with a more stable quantization. In "quantizer.c" line 118 (github line number) change the variable lastInput type from uint8_t to uint16_t. Also, change the magic number 2 o…
-
After some digging through this forum I found "another thread (click)" which seems to describe my issue. Quote from that thread: "anyone up for beta testing a bugfix update for the Penrose quantizer? In the continuous mode the CV in was too sensiti…