nagual
About
- Username
- nagual
- Joined
- Visits
- 73
- Last Active
- Roles
- Member
Comments
-
2) when i turn to 126 the second voice filter frequency the sound stop. what filter type? if it is a Hp filter, maybe that's a reason?
-
when I set the Midi note to an instrument to C-2, it is actually C-1 according to Reaper when I am sending Midi. So there seems to be an octave difference in between. LXR might be off by an octave or Reaper might be.
-
oh thats great
-
Im amazed i could help, im wrong a vast percentage of the time
-
it looks like most of the code of LXR is in C
-
the wiki manual is a bit outdated. on SHIFT+Load/Save, Page 2, there is an option called RXF (RxFilter) Set it to all. Set your BPM to 0
-
xirso, have you seen the wishlist at the wiki? do any of those items seem realistic to you or do you think they take too much CPU power?
-
Omg this wishlist looks so lush
-
Started sorting everything into sections, and added some wild ideashttp://wiki.sonic-potions.com/index.php/Official_Wishlist
-
requesting a login for the wiki
-
gosh, i forgot about this post, i would have updated it since some of this weirdness vanished. i plan to look at the code too when i get to the studio. btw, is the firmware link on the main site different than the latest at github? (i cant remembe…
-
great tip, thx!
-
brilliant, it's good that there is a roof on it again!
-
i would like a hint or two as to locating the DSP section of the code. there are a lot of files. i'm not lazy, i couldn't find them, and im hoping someone has already seen these files and can just tell me where to look.
-
confirmed. This seems true for SNARE, CLAP/CYM, and CL/OP HIHAT
-
i agree with most of what you're saying, but mostly with the envelope and LFO divisions. i find a lot of the synthesis parameters generally speaking want to be more fine tuned to more usable ranges/curves/emphasis how many parameters does your 'cli…
-
i would take the case off, plug it in, and try to isolate the part that causes the corruption, starting with the oled by pushing on it, but it could be something else.
-
is the firmware what is on the SD card or is it what's flashed on the ATmega chip?
-
i mean if you hold shift and touch a pot, the setting would just jump to zero or to that parameter's default (init) position.
-
i was thinking shift+knob would be useful to snap knob settings to a default position
-
hm good question. i know you can modulate the waveform selection, so i imagine if you got the LFO set to exactly the right rate, and filled your sample folder with a wavetable, and set the center point of the LFO to where it doesn't select the defau…
-
I found a problem with unplugging outs 1 and 2 while playing, and replugging into 3/4, unplugging, and then replugging into 1 and 2. Plenty of random results such as Load/Save information disappearing, silence in the sound output, a corrupted filen…
-
I was wondering if the user samples are supposed to show up in the Click section, mine only show up in the Osc section. I want to use my own samples for transients to supplement (or phase modulate) the main synth voices.
-
isn't it possible to buy an arduino mega pro mini (or a due etc...) and squeeze that into the chassis somewhere to get as many samples as they needed?
-
I guess this is going to sound far-fetched and precocious, but is it within the realm of possibility for a tinkerer to tie in a card/processor of their own and fill it with samples?
-
has anybody tweaked the synthesis methods or changed transients for LXR?
-
I knew there was a chance that the midi out could be configured as thru. Need to look into that. Does LXR play in pitched mode across the keyboard Or on specific note numbers? Or both? I just ordered mine so I have not even touched one yet
-
for the second question: the LXR only has a midi in and midi out, and unless i am mistaken, you need a midi thru to sync your wolf from your DAW after the LXR. a midi thru box is a cheap way to fix that, but if you don't have an USB powered 4x4 midi…