sispac
About
- Username
- sispac
- Joined
- Visits
- 44
- Last Active
- Roles
- Member
Comments
-
hey julian! you had time to check out the resonance curve of the filter? I like to know what you think Thanks
-
I would like to turn the pot to increase resonance is gradual, as I am used to in other synths as shruthi, tetra ... Insist that now, at least in my lxr only sound change (significant) at the end of the rotation occurs.
-
Well I think it works better if the resonance has a more exponential scale, so it will be more evident in the sound change all values in the range. So you can play the best twist the potentiometer
-
Curve control the filter frequency is the same? because the frequency has a correct scale and resonance seem to really change is only at the end of potentiometer rotation. That happens to me
-
Please, can someone help me? There is correct the functioning of the resonance of the filter? Thank you
-
I had similar problems, the synthesizer was blocked to the time to work with him. There was using a power of 7,5v 500 ma. Change one of 9v 1a and the problems were solved!
-
Nice!!!!
-
ok! I changed to a 9v power supply 1mA and seems to have fixed almost all problems. I have only had a charging problem with patterns. Today I have a small live concert and I will use the LXR, I hope all goes well!
-
I have reviewed the entire electrical circuit, and I've also soldered the jumper switch. Placed a jumper for the future place a switch. I think I fixed the problem, the synth and not reset. Today I had another two hour session and I have noticed a f…
-
after a session of two hours, the synth has blocked 3 times, one of the times appeared on the display Chinese characters! I think something is wrong ...
-
The direcion of the caps is correct, I've also reviewed the avr welds and are correct. Sometimes when the operating system loads for a second and light some leds, sometimes other LEDs light up, but eventually loads the correct operating system After…
-
Finally came the kit and I've finished assembling the synth. Fair in testingl red LED, the synthesizer was fixed with the led on the first instrument and did not work. I cleaned the PCB of flux residues and impurities and now seems to work well. I n…