Home › nilspupils › Comments
nilspupils
About
- Username
- nilspupils
- Joined
- Visits
- 35
- Last Active
- Roles
- Member
Comments
-
One temporary solution *might* be plugging and unplugging the LXR (to turn on or off) only when the supply is already on and running and *not* by switching the power supply on and off. Some supplies might not turn off in a controlled way and put the…
-
Anyone looking for a decent drum and percussion library in 16bit mono? You can donload the Akai MPX8 Library here: http://www.akaipro.com/product/mpx8#downloads
-
@julian: Had a chat with the drummer last night how to handle substeps when shuffeling: From a musical point of view substeps should either belong to the binary or the ternary pattern and nothing inbetween, as this would lead to polyrhythm. Even whe…
-
It is probably a bad / cheap tip you are using. You should probably invest in an iron with a "longlife" soldering tip. It is much easier to work with also...
-
I had a similar problem, some time ago. Before i could really figure it out, it disappeared. It seemed to occur only for a while after i turned on the machine. During these times it affected all buttons and most button presses...
-
I second the different roll speeds, they would be really useful. Perhaps you should be able to set roll speed (and voice) for each button individually. Great would be *one* button which toggles between a 1/4th bass and a 1/8th snare roll, so you ca…
-
@julian: As far as i understand it from Roger Linn's comments here: http://www.attackmagazine.com/features/roger-linn-swing-groove-magic-mpc-timing/ the "Linn" swing only affects the 16th and not the steps inbetween. I will however ask my drummer p…
-
even better!
-
+1
-
Not trying to be annoying, but in the HiHat page there is still F2 instead of G2 below OSC2, and i could totally live with that, so it is just FYI. Thanks for your great grapics btw...
-
Thanks loderbast! The problem is with all of the step LEDs. I ill have a look into the schematics later, and probably get some replacement chips, just to check...
-
Great! Thanks Julian!
-
Wow! Thanks! Just noticed: Below Osc2 in the Clap and Hihat Page it should probably be "G2" instead of "F2"? Greetings!!
-
I really like these! Could you make a version with white background, too? Thanks a lot!
-
Ok, my bad: The voice panning actually does work, it really was the second mix page. I must have accidentally changed that value. Sorry! I do still have the other problems with noise coming in and responsiveness of the keys. My setup is very basic…
-
Very nice!!
-
It is an audio grade 9V 1.7A power supply, but i have to admit that my setup was perhaps not properly grounded due to 2 wall warts...
-
Hi Julian and forum, first of all, thanks for this great machine! Took about 5 hours to build, the only issues i had were the display connector (took the plastic thing away in the end, then it was fine) and one forgotten LED, it was late... So…