Home › windspirit › Comments
windspirit
About
- Username
- windspirit
- Joined
- Visits
- 43
- Last Active
- Roles
- Member
Comments
-
I think you need to change the clock resolution to change that. FYI I drive my LXR from an external analogue clock fairly often and it never causes the click issue.
-
I think that I would use this to sequence external gear much more if there was just a note quantizer. Honestly it would be handy for the drum sequences too, I find myself using the encoder to get precise melodies and fumbling around when turning a …
-
Sorry for the delay, finally had some time to sit with the drum machine and test things again. I can confirm that the click still happens on the normal firmware but it seemed a little different? I couldn't really put my finger on it. The click al…
-
Hey Brendan, I just finished moving so I haven't had the time to double check this. FInally got my synths out of storage so I will have an update soon .
-
I can't remember, does the LXR use a multiplexer for the analog inputs? That may have something to do with it.
-
This concern always shows up when a FB group is started and it never takes away from the original forum (in my experience).
-
I had to go into the 'mix' menu and change the 'note' option from 'any' to the desired note value one by one. The sort of annoying thing about this is that this setting seems to be saved with the drum kit so loading a new drum kit means inputting t…
-
Hmm interesting. Does this mean that the patterns no longer change together for all of the drum voices?
-
You can get sub steps by pressing the shift key and then selecting the step that you want. This will turn the voice keys into the 8 substeps of the selected step. You may have to do this hands on in order to get what I am saying. I believe that o…
-
I think that all of these controls are inputs.
-
You can record the "rolls" in performance mode if you toggle recording, this does pretty much what you are suggesting. In this case I usually do a roll of 16 for beats quantized to 16th notes. Either that or I will write a pattern using the step s…
-
OWL didn't work either. Prettymuch step 10 always loops the last 4 steps, step 11 always loops the last 2 steps and step 12 always stops the sequencer
-
Hey so it seems like the looping parameters have been replaced with "FX1" and "FX2" parameters which both control some kind of bit-mangling effect? As nice as the effect is I would prefer to have access to the loop effects. Is there a previous ver…
-
Do you mean slow as in low sampling rate or slow as in latency? Are there any un-used adc pins directly on the core processor board?
-
Ah I see it was in your post already, thank you!
-
Yeah I speak a bit of french but I still couldn't find his "homepage". Mostly interested because I don't have the $$$ to buy right now but I would like one eventually. Good luck with your sale!
-
Hey where did you get that LL113 Sequencer? I have been looking for something like that for a minute in DIY but I can find very little info that is not in french, do you make them?
-
Yay!
-
ahem is the code open source?
-
What about something like 4 voices with one knob ver function? You wouldn't need the internal LFOs anymore if you had CV inputs for several functions.
-
Really excited to see what other modules you guys will make, I am definitely into this one. Will the firmware also be opensource for this?
-
Eurorack module anyone?
-
Sorry that there is a bug but I am relieved that it is not a problem with just my unit. I love this thing but I primarily want to use it with my modular so clock in is a must!
-
Does it have anything to do with the "ADC" and "gate" pin header on the LXR that is currently un-used?
-
Thanks for responding, I was trying to set it up as a MIDI slave to my volca beats (with the MIDI out mod) but it was my first night with the unit when I posted so I had not messed with the MIDI filtering settings. I will do this more thoroughly wi…
-
Anyone?
-
http://www.adventurekid.se/akrt/waveforms/ Just came across this incase this ends up happening.
-
What about adding extra destinations to the mod envelope? I originally thought that the velocity mod routing was doing this. It would be cool to be able to route the internal envelope to sample rate, filter cutoff, LFO frequsnecy etc.