› ›

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

jbdiver

About

Username
jbdiver
Joined
Visits
42
Last Active
Roles
Member

Comments

  • Ground loops form when the trigger in/out jacks are connected to my modular trigger in/out jacks. This causes a high-pitched whine on the LXR audio output. I can eliminate this issue by connecting ground loop isolators to the cables between the trig…
    in What's happening at Sonic Potions? A summary Comment by jbdiver April 2015
  • I wish the trigger board could be redesigned to provide ground/noise isolation. That's the biggest issue I have with the LXR while working with modular gear. I've thought about buying more ground loop isolators, but the thought of connecting 8 groun…
    in What's happening at Sonic Potions? A summary Comment by jbdiver April 2015
  • There is some discussion of this issue in this thread: http://forum.sonic-potions.com/discussion/405/lxr-output-noiseinterference#Item_34 Basically a ground loop is forming when you connect the LXR+triggers to another synth like a eurorack modular. …
    in Interference from trigger output board Comment by jbdiver March 2015
  • I'm using a fairly high quality power supply. I bought a ground loop isolator and connected it between the trigger output and my modular. It effectively eliminated the high-pitch noise. I would need one for every trigger board connection I'm using w…
    in LXR output noise/interference Comment by jbdiver February 2015
  • I found these instructions confusing too. However, this key sequence is not needed. Just hit SHIFT+LOAD to get to the menu. Then use the encoder to scroll to cki (clock input) or co1/co2 (clock outputs) to change the clock division.
    in Trigger IO Configuration Page Comment by jbdiver February 2015
  • Was a solution ever found for this issue? I can notice this high pitched noise when my trigger outs are connected to my modular. I've tried a number of different power routing changes but nothing helps.
    in LXR output noise/interference Comment by jbdiver February 2015
  • This sounds really cool. I wish this kind of functionality was added to the main repo instead of a fork. 
    in LXR OWL: a new unofficial firmware :-) Comment by jbdiver January 2015
  • The LXR shuffle algorithm seems similar to the MPC swing algorithm. I think a big difference is that the MPC takes into account the quantization setting. For example, if the box is quantizing on 16th notes then every other 2nd 16th-note is shifted. …
    in Shuffle algorithms Comment by jbdiver January 2015
  • I have 0.34 installed. I built this box a month ago and I was able to reach the trigger IO menu once before. Perhaps something in the configuration state of the device is now preventing access to this menu.
    in Cannot access trigger IO settings page Comment by jbdiver January 2015
  • Brendan, are you going to issue a pull request at some point to get your mods merged back into the sonic potions code? I'm just wondering what will happen once the sonic potions code is updated. Great work!
    in Copy/Paste Tracks Between Patterns Comment by jbdiver November 2014
  • Girts + 1 Girts Seat list (18):Squirts 1Clemdu 1Masarin 1gowron72 1 echo 1 matsu 1 SirCVH 1 cube48 1 tMt 1gianni 1 drakula 1 BLOKE 1 boe 1 vasculator 1 spneca 1 Spylacopa6 1 bod 1 jbdiver 1
    in Case/enclosure for LXR Comment by jbdiver November 2014