Howdy, Stranger!
It looks like you're new here. If you want to get involved, click one of these buttons!
LXR 8 select button LEDs turning off
I've noticed some strange behaviour from my recently built LXR (firmware0.37). If I'm in Voice mode and hit shift to go into Step Edit mode, when I come back to Voice mode the LED corresponding to whatever voice parameter page I was in is no longer lit, but the correct info shows back on the screen, and if I tap the Voice button again the right LED lights up.
Worse is that while holding shift in Step Edit mode, if I select a new step to edit all the substep LEDS (i.e. all 8 voice parameter LEDs) turn off. If I release shift and engage it again, the correct substep lights turn on. I'd say about 5% of the time selecting a new step will show the correct substep LEDs lit, so it's a bit intermittent.
As I'm new to the LXR, and built it myself, I'm just wondering if others have seen this? Is it a known feature or did I screw something up in my build? Thanks for your help!
Worse is that while holding shift in Step Edit mode, if I select a new step to edit all the substep LEDS (i.e. all 8 voice parameter LEDs) turn off. If I release shift and engage it again, the correct substep lights turn on. I'd say about 5% of the time selecting a new step will show the correct substep LEDs lit, so it's a bit intermittent.
As I'm new to the LXR, and built it myself, I'm just wondering if others have seen this? Is it a known feature or did I screw something up in my build? Thanks for your help!