fcd72
About
- Username
- fcd72
- Joined
- Visits
- 1,237
- Last Active
- Roles
- Member
Comments
-
refinished - had a bad MIDI OUT Jack (yes, this happens....) which i never discovered beacuse i slave everything to my Cirklon but wanted to take her with me to hollidays as Master Clock Device. So Display removed, Display cleaned up, MIDI Jack remo…
-
You should get a new battery for your multimeter......
-
If a component is defective it will most likely have no conductance whatsoever. Chances are best you have accidentially shorted something, somewhere. Post some High Res (REALLY high!!) Pictures of the Front and Back of your Board, maybe we can spot …
-
Is the Adress mentioned in post#1 everytime the actual Firmware?
-
While you are at it, can you please change the color scheme to white - else i will have to clean my iMac with this black background.....
-
a third gender? irresolutely?
-
the end is multiple wall warts of all sizes....
-
The suggested one outputs 600mA and is proven to power 1 LXR or 3 Shruthis or 2 Shruthi + Anushri or MidiALF, Shuthi, Anushri. And thats because i only soldered 3 jacks to it ;-) BTW, i use the bigger 1200mA Version to Power Microwave XT, MicroQ and…
-
They opened the case pack? What did they suspect to be in there? LXR-Case shaped pressed Cocaine???
-
Seems to be the standard Operations procedure to throw them under a steamroller to save some precious space on the way back....What happened to the case??
-
Some day well get you....
-
Shure 12V will work, the 7805 regulator can take up to 16, 17V but be aware it converts the excess Power to Heat. I suggest you get a approx 300mA 7,5V Switching Power Adaptor, the 7805 Regulators need about 2V headspace to work properly, so theres …
-
If you are as clever as me, id check the orientation and place of every 595/165..... NOT THAT I WOULD EVER ADMIT I HAD SOME SCRAMBLED UP!!!
-
For Reverb id go for an external FX anyways, and delay.... hell every MultiFX does this. Personally i have no need for onboard FX. Stutter by repeated NoteTriggers albeit would be cool....
-
Do you use a Nagelknipser(tm) to cut the Leads??!?!?!?!!!EINS!!!ELF!!!! (see round 0:56)
-
You are confusing Chuck Norris with Superman.... Chuck Norris doesnt need Chips, the electrons follow his will without silicon....
-
Yeah, right! Real man have a desoldering gun......
-
I dont care for tracking - i care for registered mail that the recipient has to sign for. Your Postguy then knows that the Box will be missing if not delivered..... @Julian Päckchen mit NACHWEIS???
-
I mostly use Päckchen mit Nachweis which is technically a Letter with up to 2kg, registered but uninsured. Its only available online (and the clever girls at the PostOffice tell me everytime that this isnt possible). I never lost anything that way.
-
For single supply i use MCP600x.... you then only have 1/4 to screw up
-
How about being lazy and just use a stack of TL074s for buffering the outputs? Then you can have any Output Voltage you like.....
-
to answer 1) and not beeing a MI/SP official: The Shruthi does this on purpose as you can send manymanymany CCs/NRPNs and you only would see sludge on the Display. + you are wasting precious Computing Time, this being a slightly minor issue on the L…
-
Hopefully you live in an earthquake safe area ;-)
-
*like
-
I have the original 4PM Spermy White on stock.... if anyone will give it a try ;-)
-
Nope, this will fit into the standard case, just swap you back panel. I think it will be included with the PCB.....
-
+1 for saving total machine snapshots - maybe even with journaling like on the ambika? theres plenty of space on a 16gb card ;-)
-
Will you offer Upgrade/Swap AVRs?
-
Manymanymanymany... my whole world is Neuropa Grey......
-
I could format a Card the wrong way with OS X ;-)