Stil a good idea! You know men - we never ever read manuals, the most we do is take a look on the Box. Therefore a half naked girls or a cheatsheet on the Box would surely help
Can confirm that the 27k Current Limiting Resistor is from a time before i infected julian with flat top LEDs - so its me to blame for all the hassle ;-) Maybe for the next revision there should be just a "CLR" marking....
Personally i did it following the heights: first Resistors, Diodes on Back and Front, then the higher parts to the front, than the connectors + PSU to the Back, at last the DisplayMostly because i discovered the instructions after i was done ;-)
Mine - which i may explicitly state - was besides my own faults (not enough 165s in da house, no 1,2K Resistor, no 470NF Cap, forgot to order the 2x13 connectors for the MainBoard hence making my own from 1x10s, spilling some coffe all over my works…
Bumm Tschack Bumm Plingdi Bumm Tschack Tzyyyy......
Easy build - if you dont reverse the chips, have enough 165s on stock and dont have to borrow one from a Shruthi and put in the jumpers to the MainBaord....
Now lets dress her!
Indeed Ableton has severe problems with negative Values for the NRPNs, go ask TubeOhms Andre about his experience for the Controller.
I have no clue what phantastic Synthesis it is that takes 127 parameters but id opt for both, accepting NRPNs and …